There are various styles and colors including flood lights, halogen bulbs and lights with a motion detection camera that record what activates light for an added sense of security. Some motion detection lights even with a photo sensor that turns off the lights when the sun rises and when it darkens out. You can also adjust the amount of time the light stays on after it stops detecting movement.
Watch the video to learn how to install a new motion sensor light
In this video, Ask This Old House Electrician master Scott Caron installs a light over a garage to illuminate a dark driveway.
Steps:
1. Lawyers for an available energy source near the location of safety lighting and turn off power to that source.
2. Cut the connections of the buildings with the wire cutter.
3. Drill an exit hole through the outer liner using an electric drill with a 1-inch piece of palm. Run the 14 gauge cable from the indoor location to the outdoor location.
4. Attach the safety light fitting.
5. Connect the power cables with the lamp cables and cover with the cable connector tubes.
6. Deploy flexible putty and fasten around the hole in the exterior of the house. This will serve as a barrier to the sea weather resistant.
7. Attach the light fixture and electrical enclosure to the exterior cladding using an electric drill and screws.
8. Replace the existing output with a switching device that can serve as an override.
Video
tags : how to install a brinks interior locking door knob, how to install a brinks digital deadbolt, how to install brinks keypad, how to install brinks digital deadbolt, how to install brinks motion activated security light
Hello, my name is Jack Sparrow. I'm a 50 year old self-employed Pirate from the Caribbean.
No comments:
Post a Comment