How to install brinks keypad

How to install brinks keypad | Brinks home security systems include a numeric keypad, which you can use to control the system. If your Brinks keyboard is a fault, you need to remove it to be able to replace it with a new part.

Thread Tools
You will need the following tools to help remove the Brinks home security keyboard:

Small flat head screwdriver
Small cross-head screwdriver

Disable alarm
Before you begin to remove the Brinks keypad, enter your personal access code to deactivate the alarm system. If you try the keyboard while the alarm is active, the system may be that the intruders are trying to manipulate and sound the alarm.


Remove the front panel
Take a look at the front panel of the keyboard. You should see four small slots located near the top and bottom of the panel. Insert a small flathead screwdriver into the first groove and twist to loosen the panel. Do the same with the other three slots. It should now be possible to pop the front panel. Do not use too much force; The front panel is still connected to the alarm system by some cables, which do not want to tear or loom.



Remove internal keyboard mechanism
Look for four leads that lead from the front panel to a small black plastic bar on the side of the circuit board. It is usually hidden under the panel. For these cables, use a crosshead screwdriver to loosen the four crosshead screws holding the black plastic rod in place. This allows the lifting of the keyboard panel without the rest of the alarm system.


Connect Cables to the New Brinks Keyboard Panel
Once you have removed the old Brinks keyboard, you can place a new one in its place. First, loosen the screws on the black plastic bar of the new panel to open it. Then, slide the wires under this bar and attach them to the correct connection points. The yellow wire must be connected to the connection marked "DATA", the green wire connects to the "CLK" point, the black wire connects to "V-" and the red wire connects to "V +". It is important to connect these cables in the correct order, otherwise the keyboard. After checking the order of the cables, use the crosshead screwdriver to tighten the screws so that they hold each wire in place. Tug gently on each cable to ensure it is securely connected. If necessary, it is necessary to reposition the cable or tighten the screw a little more.



Mount the keyboard panel of New Gullies
Align the new panel with the bracket and apply gentle pressure to snap into place. Use the flathead screwdriver for the panel and bracket. Test the new panel to make sure it works as expected. Now you can get rid of the old Brinks keyboard.



How to Buy a Brinks Keyboard on eBay
You can buy replacement parts for your Brinks home security system on eBay, including a Brinks keyboard. When purchasing spare parts for the home security system, read the descriptions of the items to ensure that the piece you purchase is compatible with your system. You can search for an appropriate part by typing "Brinks keypad" followed by the model number or model of your alarm system in the search bar. Alternatively, browse through the Home and Garden section of the site to find the replacement part you need.